- News
- Tel:0086-185-3993-1566
- E-mail:wendy@machinehall.com
- Skype:wendymachinehall
How to Use And Maintain Sugar Boil Machine ?
Electric heating Temperature Control Sugar Boiler Machine use and maintenance of the note:
1, the equipment for the tilting mezzanine pot.Before the use, the transmission parts should be checked, add lubricants, so as to avoid dry grinding, damage to equipment.
2, check the electrical lines whether intact? the connection whether safe? before start the sugar boil machine, we must make sure all the part is on position.
3, check the amount of heat transfer oil before the start.The amount of fuel for the following 5 cm fuel.
4, the normal use of the process, the pot on the edge of the two inlet after the addition of oil can not be blocked, open heating use
5, check the handle fixed bolt is solid, shake to avoid heating tube wire and pot body friction leakage.
6, the operator can not carry water operation, in the external oil leakage phenomenon, stop the operation.
7, in the operation to strictly control the temperature, under normal circumstances, control in 200 degrees below.
8, before the material should be the first heat transfer oil import and export blocked after the material.
9, each change the oil, you should first remove the electric tube, clean with alkaline water and then refueling.
10, the use of heat transfer oil 20 pots, should change the oil once, every month should be put off the oil, add 40 ℃, 2% lye filled with jacket soak 2 hours, then hot water cleaning.
11, after every 4 months after the overhaul, including: the replacement of electric tube, the Ministry of gasket and electric heating lines, check the thermometer and other content.
12, the electric heating sandwich pot is a high energy consumption of electrical equipment, in the actual use of the process, we must ensure safe operation and management, in strict accordance with the procedures, and do a good job daily record in order to better maintain the equipment.
1, the equipment for the tilting mezzanine pot.Before the use, the transmission parts should be checked, add lubricants, so as to avoid dry grinding, damage to equipment.
2, check the electrical lines whether intact? the connection whether safe? before start the sugar boil machine, we must make sure all the part is on position.
3, check the amount of heat transfer oil before the start.The amount of fuel for the following 5 cm fuel.
4, the normal use of the process, the pot on the edge of the two inlet after the addition of oil can not be blocked, open heating use
5, check the handle fixed bolt is solid, shake to avoid heating tube wire and pot body friction leakage.
6, the operator can not carry water operation, in the external oil leakage phenomenon, stop the operation.
7, in the operation to strictly control the temperature, under normal circumstances, control in 200 degrees below.
8, before the material should be the first heat transfer oil import and export blocked after the material.
9, each change the oil, you should first remove the electric tube, clean with alkaline water and then refueling.
10, the use of heat transfer oil 20 pots, should change the oil once, every month should be put off the oil, add 40 ℃, 2% lye filled with jacket soak 2 hours, then hot water cleaning.
11, after every 4 months after the overhaul, including: the replacement of electric tube, the Ministry of gasket and electric heating lines, check the thermometer and other content.
12, the electric heating sandwich pot is a high energy consumption of electrical equipment, in the actual use of the process, we must ensure safe operation and management, in strict accordance with the procedures, and do a good job daily record in order to better maintain the equipment.
